Aligning your Temperature Knob

Follow these steps to correctly align the temperature knob with the dial on your Argos.


  1. Remove the Knob
  • Use the 1.5 mm hex key to loosen the grub screw on the temperature knob.
  • Gently pull the knob off the potentiometer shaft.

  1. Reset the Potentiometer Shaft
  • Rotate the shaft fully counter-clockwise.
  • Then rotate it one detent (click) back clockwise.

  1. Reposition the Knob
  • Place the temperature knob back onto the shaft.
  • Align the indicator line on the knob with 88 °C on the temperature dial.

⚠️ Note: Make sure there is a wide-enough gap between the knob and the wooden side panel. This ensures the knob has enough clearance to produce the proper clicks during use.


  1. Secure the Knob
  • Tighten the grub screw with the 1.5 mm hex key.
  • Ensure the knob is firmly locked in place.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.